Article · Frontiers in Mechanical Engineering · August 26, 2026
Research of a gantry robot for pushing bulk materials loaded in portions into a container
Madi Kaliyev, Askar Seidakhmet, Аmandyk Tuleshov, Assylbek Jomartov, Yerkebulan Tuleshov, Sayat Makhmet
Abstract
Introduction Loading bulk materials into a container through a small upper hatch results in the formation of a cone-shaped pile that must be redistributed after each portion to ensure uniform filling. This paper presents the design, kinematic modeling, and experimental validation of a 4-DoF gantry robot developed for pushing and redistributing bulk materials inside a container under severe spatial constraints. A specialized end-effector, implemented as a rotatable rod with forward-facing blades, enables planar redistribution of the deposited material. Methods A complete kinematic model based on the Denavit–Hartenberg method was derived for reliable control of the end-effector position and orientation. Analytical relationships were derived that determine the redistributed layers using geometric methods. Based on these analytical relationships, a redistribution algorithm was developed that takes into account the cone height, layer thickness, material density, and container geometry. Results Analytical relationships describing the geometry of the redistributed layers were obtained, enabling the development of an algorithm for pushing material parallel to the container bottom. A physical prototype was fabricated, and experimental studies were conducted to measure the normal stresses acting on the pusher rod during material displacement. Discussion The results confirm the effectiveness of the proposed robot design and control approach in achieving uniform redistribution of bulk material loaded in portions within a constrained container environment.
More by Assylbek Jomartov
- Calibration of Differential Wheeled Mobile Robot with Trajectory Measuring DevicePreprints.org · 2026
- Analytical Modeling of the Transition Between Motion Modes and the Oscillatory-Damped Mode of the Mixing and Whipping DeviceMechanisms and machine science · 2026
- СИМУЛЯТОР ЗЕМЛЕТРЯСЕНИЯ НА ОСНОВЕ ПЛОСКОГО ТРОСОВОГО ПАРАЛЛЕЛЬНОГО РОБОТАScience and Technology of Kazakhstan · 2026
- Dynamic Modeling of the Anisotropic Non-Ideal Weakly Gyroscopic Rotor SystemApplied Sciences · 2026
