Article · Applied Sciences · June 21, 2026
Dynamic Modeling of the Anisotropic Non-Ideal Weakly Gyroscopic Rotor System
Zharilkassin Iskakov, Aziz Kamal, Assylbek Jomartov
Abstract
In this paper, the dynamic modeling of the anisotropic non-ideal gyroscopic rotor system is considered. The equations of nonstationary transitions are derived from the motion differential equations, from there the control equation and stationary frequency dependencies, force and energy relations. When the rigidity of the elastic support is anisotropic in orthogonal directions, two critical velocities and, accordingly, two resonance regions are found. Because of the strong interaction of the rotor system with a non-ideal DC motor, slopes of the resonance curves are observed in the regions of critical speeds even in the absence of a non-linear component of the reference stiffness, and loops. It has been proven that the cubic nonlinearity of damping strongly suppresses the resonant amplitudes of the rotor, reduces the size of the loops even more, and strongly attenuates the Sommerfeld effects until they are completely eliminated than linear damping. It is shown that an increase in the magnitude of the cubic nonlinearity of damping greatly facilitates the passage of the resonance region and expands the range of operating speeds. This proves that the amplification of linear damping with cubic nonlinearity of damping is one of the methods for controlling resonant passages and an effective damping model.
More by Assylbek Jomartov
- Calibration of Differential Wheeled Mobile Robot with Trajectory Measuring DevicePreprints.org · 2026
- Analytical Modeling of the Transition Between Motion Modes and the Oscillatory-Damped Mode of the Mixing and Whipping DeviceMechanisms and machine science · 2026
- Research of a gantry robot for pushing bulk materials loaded in portions into a containerFrontiers in Mechanical Engineering · 2026
- СИМУЛЯТОР ЗЕМЛЕТРЯСЕНИЯ НА ОСНОВЕ ПЛОСКОГО ТРОСОВОГО ПАРАЛЛЕЛЬНОГО РОБОТАScience and Technology of Kazakhstan · 2026
