Talk · International Conference on Communications, Information, Electronic and Energy Systems · January 19, 2026
Development and Modeling of a Modular Ankle Prosthesis
Yerkebulan Nurgizat, Abu-Alim E. Ayazbay, Arman Uzbekbayev, Nursultan Zhetenbayev, Kassymbek Ozhikenov, Гани Сергазин
Abstract
This paper presents a low-cost, modular ankle–foot prosthesis that integrates an S-shaped compliant foot with a parallel spring–short-stroke actuator branch to balance energy return, impact attenuation, and rapid personalization. The design follows an FDM-oriented CAD/CAE workflow using PETG and interchangeable modules (foot, ankle unit, pylon adapter). Finite-element analyses of heel-strike, mid-stance, and toe-off load cases, supported by bench checks, show strain localization in intended flexural regions, a minimum safety factor of 15 for the housing, and peak-stress reduction after geometric refinements (increased transition radii and local ribs). The modular layout simplifies servicing and allows quick tuning of stiffness and damping without redesigning the load-bearing structure. The results indicate an engineeringly realistic path toward accessible prosthetics and provide a basis for subsequent upgrades toward semi-active control and sensor-assisted damping.
More by Yerkebulan Nurgizat
- Galois Coordinates for Three-Dimensional Shape Representation and Spectral Description of Convolutional NetworksComputation · 2026
- Fault tolerance analysis of decentralized swarm coordination under progressive agent failure in autonomous robotic systemsVibroengineering PROCEDIA · 2026
- Design and Bench Evaluation of a Sensor-Integrated Prosthetic-Leg PrototypeSensors · 2026
- THE ALATAU SEISMIC BENCHMARK DATASET AND TRAINING THE PHASENET NEURAL NETWORK ON LOCAL DATAВестник Алматинского университета энергетики и связи · 2026
