Ultra‐low power TIA with variable bandwidth in 0.13 μm CMOS for short‐range optical interconnects

Abstract

Abstract An ultra‐low power and variable bandwidth transimpedance amplifier (TIA) for short‐range optical interconnects is presented here. The TIA is implemented in a 0.13m complementary metal oxide semiconductor (CMOS) technology. To reduce the power consumption, the TIA is designed using a regulated cascade topology with capacitor degeneration for frequency enhancement and also operates in the weak inversion mode. With a supply voltage of the range 0.7–0.92 V, a reduced power consumption of 2.9–4.6 mW and a variable bandwidth of the range 3–4.9 GHz are achieved. Clear eye diagrams are obtained at 2.5–6.135 Gbps and a BER of less than 10 −12 with input power of −4.3 to −3 dBm at 2.5–6.135 Gbps, respectively. Also, the TIA achieved a transimpedance gain of 51.2–52.4 dBΩ. The small‐sized chip occupied an area of 0.28 × 0.42 mm 2 with pads and 0.1 × 0.1 mm 2 without pads.

More by Mohammad Hashmi

• Physics-Guided Machine Learning for FMCW Radar-Based Human and Metal Target ClassificationIEEE Sensors Journal · 2026
• A novel filtering T-shaped transmission line structure and its application in the design of reduced-size Butler matrixScientific Reports · 2026 · Citations: 1
• Textile Integrated MIMO Antenna with Distinct Elements for On/Off Body mmWave 5G WearablesUnited States National Committee of URSI National Radio Science Meeting · 2026 · Citations: 1
• Wireless Power and Information Transfer System Employing DGS based ResonatorsUnited States National Committee of URSI National Radio Science Meeting · 2026