Article · Acta Metallurgica Slovaca · September 24, 2025
Study of scandium sorption from a solution of leached waste from titanium production with hydrochloric acid
Bauyrzhan Orynbayev, Azamat Toishybek, Almagul Ultarakova, Omirserik Baigenzhenov, Arailym Mukangaliyeva
Abstract
This study examines the sorption of scandium from hydrochloric acid (chloride) solutions using cation exchange resins: Purolite C-150H⁺ and Purosorb SAC140H⁺. The resins were compared based on their sorption performance, including extraction efficiency, static exchange capacity, and selectivity in the presence of accompanying elements (Al and Ti). Optimal sorption conditions—pH, solid-to-liquid phase ratio, and temperature—were determined experimentally.The results show that scandium sorption on Purolite C-150H⁺ follows the Langmuir isotherm (R² = 0.9269), indicating monolayer adsorption on a homogeneous surface. In contrast, sorption on Purosorb SAC140H⁺ is better described by heterogeneous adsorption models: Freundlich (R² = 0.433) and Dubinin–Radushkevich (R² = 0.647) isotherms.
More by Omirserik Baigenzhenov
- Magnetic bentonite–keratin and bentonite–wool bio-composites as sorbents for magnetic dispersive micro-solid phase extraction of Pb(II) and Cd(II): Optimization and mechanistic insightsTalanta Open · 2026
- Adsorptive approaches for silicon recovery from industrial wastewater: materials, mechanisms, and recent advancesEgyptian Journal of Petroleum · 2026
- Valorization of Chrysotile Asbestos Waste into Hierarchically Porous Adsorbents for Thermal-Contact Demetallization of Heavy Oil: Mechanistic Insights and Process OptimizationInternational Journal of Technology · 2026
- Selective Nickel Recovery from the Magnetic Fraction of Chrysotile Asbestos Beneficiation Waste Using Organic AcidsInternational Journal of Technology · 2026
