Article · Journal of Hazardous Materials · December 24, 2024
Stability and flow behavior of polymer-enhanced foams for improved in-situ remediation of hydrocarbons: Effect of polymer-surfactant interactions
Adil Baigadilov, Stéfan Colombano, Sagyn Omirbekov, Maxime Cochennec, Hossein Davarzani, Fabien Lion
Abstract
Conventional in-situ hydrocarbon remediation technologies face challenges associated with high costs and low long-term efficacy. Aqueous foam injection presents a promising approach by enhancing volumetric sweeping efficiency. This study investigates the efficiency of polymer-enhanced foams (PEFs) for in-situ remediation of hydrocarbon-contaminated soil, focusing on the impact of Xanthan Gum (XG) biopolymer on foam stability against antifoaming diesel and the flow behavior in soil matrices. We examined two PEFs: Sodium Dodecyl Sulfate (SDS)-based and a blend of SDS and Cocamidopropyl Hydroxysultane (SDS-CAHS: SC)-based. Bulk foam tests pre-evaluated foam stability, while 1D sandpack experiments assessed PEFs’ performance in porous media mimicking contaminated soil remediation. Stability tests showed that XG strengthens the foam by increasing liquid phase viscosity and improving overall foam stability. The findings emphasize the importance of the interactions inside polymer-surfactant complexes, where SDS was more impacted by XG than SC due to repulsive forces and hydrophobic interactions. Foam flow experiments revealed PEFs’ higher mobility reduction factors (MRF) and noticable recovery improvement of the free-phase product (≥95 %) compared to traditional surfactant-based foams. This research provides valuable insights into optimizing PEF compositions, potentially guiding future scale-up applications for hydrocarbon-contaminated sites. • Polymer-surfactant interactions are crucial for foam stability and flow behavior. • Xanthan Gum increases foam stability by 3.6–10.8 times against destructive hydrocarbons. • Polymer-enhanced foams improve mobility reduction factor and pollutant sweeping. • Recovery yields exceed 95 % with polymer-enhanced foams.
More by Sagyn Omirbekov
- Data-driven preprocessing for prediction of the dynamic α₀-factor in full-scale WWTP aerationResults in Engineering · 2026
- Foam-assisted (bio)remediation of petroleum-contaminated soil: effects of surfactant formulation on foam behaviour, interfacial properties, and bioavailability2026
- OPTIMIZING SURFACTANT FOAM FORMULATIONS FOR ENHANCED (BIO)REMEDIATION OF PETROLEUM-CONTAMINATED SOILHAL · 2026
- Foams for enhanced remediation of NAPL-contaminated soils and aquifers: A review of foam formation, stability, and environmental applicationsFigshare · 2026
