Article · Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources · September 12, 2021
Recovery of niobium from wastes generated in titanium production by cation exchange sorbents
Omirserik Baigenzhenov, Azamat Toishybek, А.Т. Khabiyev, Indira Orazgalievna Aimbetova, A.T. Dagubayeva
Abstract
This article presents the technology of niobium recovery by processing of chloride residues generated during the chlorination of titanium slags. For waste processing, a two-stage leaching technology is proposed. Water is used at the first stage of leaching and hydrochloric acid 4.0 M is used at the second stage. For the purpose of sorption of niobium from the solution composition obtained during leaching, cation-exchange sorbents Purolite-C104 and KU-2-8 H were used. By the usage of Purolite-C104 ion exchange resin the sorption efficiency of niobium from a solution with a concentration of 2 g/l was about 71.0 % (0.071 g/g) in 3.5 hours, while for KU-2-8 H ion exchange resin, sorption efficiency was about 89.0 % (0.089 g/g).
More by Omirserik Baigenzhenov
- Magnetic bentonite–keratin and bentonite–wool bio-composites as sorbents for magnetic dispersive micro-solid phase extraction of Pb(II) and Cd(II): Optimization and mechanistic insightsTalanta Open · 2026
- Adsorptive approaches for silicon recovery from industrial wastewater: materials, mechanisms, and recent advancesEgyptian Journal of Petroleum · 2026
- Valorization of Chrysotile Asbestos Waste into Hierarchically Porous Adsorbents for Thermal-Contact Demetallization of Heavy Oil: Mechanistic Insights and Process OptimizationInternational Journal of Technology · 2026
- Selective Nickel Recovery from the Magnetic Fraction of Chrysotile Asbestos Beneficiation Waste Using Organic AcidsInternational Journal of Technology · 2026
