Article · International Journal of Innovative Research and Scientific Studies · January 18, 2024
Experimental study of a temperature measurement system for an overhead power line using sensors based on TFBG
Aliya Kalizhanova, Murat Kunelbayev, Waldemar Wójcik, Айнур Козбакова
Abstract
This article presents the use of an inclined fiber sensor Bragg grid to control the extension of wires in overhead lines. An aspect of the technological novelty of the project is the development of an innovative optoelectronic system for monitoring and diagnosing the condition of building structures based on a combination of conventional Bragg gratings. The lighting power sensor is installed directly on the controlled transmission of the power line in the form of fittings with a copper plate. A photosensitive multimode optical fiber is attached to the copper plate, at the end of which an inclined fiber Bragg grating is fixed, connected to a multimode optical fiber using a fiber-optic connector through an optical connector. An ultraviolet excimer laser and a light power detector are connected to a fiber-optic connector. The study showed that by selecting the appropriate mechanical parameters of the extension transformer, taking into account the optical parameters of the sensor, and using a special filter, the optical-mechanical system can be configured in the required range to control the sagging of the overhead line wire. During measurements to simulate the operation of a power line wire, the temperature was forced to vary in the range of 10-60°C. This led to the lengthening of the test wire from 38.987 m to 49.275 m; the error was within 4%. The deflection range depends on the distance between the supports, the type of wire, and its actual length in the span, which actually determines the deflection.
More by Murat Kunelbayev
- Improving the Energy Efficiency of Photovoltaic-Powered Drip Irrigation: Analysis of Pressure LossesInternational Conference on Nuclear and Renewable Energy Resources · 2026
- Optimization of the Electrical and Thermal Characteristics of a Hybrid PV/T System Based on CuO–ZnO NanofluidInternational Conference on Nuclear and Renewable Energy Resources · 2026
- An Intelligent Control System for a Dual-Loop Solar Installation with Thermosiphon Circulation Based on Artificial Intelligence MethodsInternational Conference on Nuclear and Renewable Energy Resources · 2026
- Adaptive Maximum Power Point Tracking and High-Frequency Sinusoidal Pulse Width Modulation Single-Phase Inverter for Standalone Photovoltaic SystemsInternational Conference on Nuclear and Renewable Energy Resources · 2026
