Article · Mineral Processing and Extractive Metallurgy Review · August 25, 2014
Complex Processing of Wastes Generated in Chrysotile Asbestos Production
Omirserik Baigenzhenov, V. A. Kozlov, V. A. Luganov, Brajendra Mishra, R. A. Shayakhmetova, Indira Orazgalievna Aimbetova
Abstract
A new recycling technology has been studied in this work to produce magnesium chloride from wastes generated in chrysotile asbestos production. The steps include enrichment of raw material by sizing, leaching of magnesium with hydrochloric acid, purification of solution from impurities of iron and nonferrous metals, and the production of magnesium chloride solutions. Thermodynamic analysis shows the possibility of dissolution of magnesium compounds in the waste by hydrochloric acid. Magnesium chloride solution is subjected to hydrolytic purification from iron and nickel. Enrichment has been carried out with material particle size of 0.25 mm and liquid to solid ratio of 4:1 and leaching with 25% concentrated hydrochloric acid has been accomplished with a stoichiometric flow rate. Hydrolytic treatment was carried out at a pH 7.5–8.0. pH adjustment was carried out by magnesium oxide. Extraction of 92% of magnesium from serpentinite was achieved.
More by Omirserik Baigenzhenov
- Magnetic bentonite–keratin and bentonite–wool bio-composites as sorbents for magnetic dispersive micro-solid phase extraction of Pb(II) and Cd(II): Optimization and mechanistic insightsTalanta Open · 2026
- Adsorptive approaches for silicon recovery from industrial wastewater: materials, mechanisms, and recent advancesEgyptian Journal of Petroleum · 2026
- Valorization of Chrysotile Asbestos Waste into Hierarchically Porous Adsorbents for Thermal-Contact Demetallization of Heavy Oil: Mechanistic Insights and Process OptimizationInternational Journal of Technology · 2026
- Selective Nickel Recovery from the Magnetic Fraction of Chrysotile Asbestos Beneficiation Waste Using Organic AcidsInternational Journal of Technology · 2026
