Skip to content
DSML.KZ
Publications

Article · Petroleum Science and Technology · July 8, 2011

Analysis of Production Logging Data to Develop a Model to Predict Pressure Drop in Perforated Gas Condensate Wells

Hamed Mahdavi Firoozabadi, Kourosh Rahimzade, Peyman Pourafshary, Mohsen Edalat

Peyman Pourafshary
Open via DOI

Abstract

Accurate prediction of pressure drop in perforated wells with a high fluid flow rate is a challenge in production engineering calculations. In this study, production logging data obtained from an Iranian gas condensate field were analyzed to develop a model to predict the pressure drop in perforated wells. To calculate the pressure drop due to the friction in the perforated section of the wall, a relation between perforation friction factor, pipe and wall Reynolds number, and Moody friction factor was developed by means of nonlinear regression. Perforation effects were also considered in total pressure drop, which occur due to the mixing of axial and radial momentum fluxes in the perforated section. The results predicted by our developed model showed good agreement with the measured production logging data from the studied field within 14% error. This model can be used to accurately estimate the well performance curve.

Oil and Gas Production TechniquesReservoir Engineering and Simulation MethodsDrilling and Well Engineeringpressure drop predictionperforated wellsgas condensate wells

More by Peyman Pourafshary