Article · Journal of Vibroengineering · June 29, 2020
A novel regenerative snubber circuit for flyback topology converters
Гани Сергазин, Arailym Nussibaliyeva, Baurzhan Tultayev, Erlan J. Dzhunusbekov, Gulsara Yestemessova, Aliya Yelemanova
Abstract
Switch mode power suppliers based on isolated flyback topology have voltage stresses on semiconductor switches caused by transformer leakage inductance. Those voltage stresses have to be mitigated by implementing active or passive clamp preferably with partial leakage energy recovery. In this paper a new integrated semi-active regenerative (lossless) snubber is proposed. The proposed snubber topology is featured by the snubber inductor integrated into the main transformer thus decreasing component count and saving the PCB space. Partial coupling of snubber inductor with a secondary side makes it possible to recover part of the transformer leakage energy directly to the secondary side with potential to increase snubber efficiency. The operation of the proposed snubber is analyzed and simulation results are presented. Interesting is that with the proposed snubber various side effects can be reached like reduction of RMS current in secondary side, ZCS and ZVS modes for secondary side rectifier and primary main switch along with achieved primary goal – voltage stress limitation and transformer leakage energy recovery.
More by Arailym Nussibaliyeva
- AlmatyExoElbow: development and biomechanical analysis of a 2-DOF cable-driven elbow exoskeletonVibroengineering PROCEDIA · 2026
- Design and Testing of an Emg-Controlled Semi-Active Knee ProsthesisSensors · 2025 · Citations: 3
- Design and simulation of a cable-driven elbow rehabilitation deviceVibroengineering PROCEDIA · 2025 · Citations: 4
- Method for Increasing the Linearity of The Phase in The Approximation Phase On 5G Antennas Using Modified Functions of The SubtractorsTrudy Universiteta · 2024
